|
SD 70M
Mar 24, 2013 20:34:54 GMT -5
Post by tlbeers on Mar 24, 2013 20:34:54 GMT -5
Hi all, I have a Genesis SD 70M, and would like to install Detail West parts but I don't where to start, I have never did anything like this before. I have looked at all the photos on Detail West page but it is still no help. I have already exchanged to old board out for a tsunami sound board. Any help will go along way.
Tim
After scanning in the instructions and enlarged them to like 400% I can read them. The photos didn't fair that well.
Tim
|
|
|
SD 70M
Apr 3, 2013 22:21:55 GMT -5
Post by antlorch on Apr 3, 2013 22:21:55 GMT -5
Tim, I would look at all the prototype photos you can. You are going to want to keep these handy to refer to as your build moves on. Also use the Details West page as reference also as much as possible. The parts have instructions and I would start where they say and go SLOWLY. I have noticed that some parts dont go on like the instructions say. Check this link out and just take a look at decide where and what you want to do. dieseldetailer.proboards.com/thread/329/ft-stockton-southern-sd75iWell start there and ask as many questions as you need too..
|
|