|
Post by v200 on Sept 16, 2010 4:55:58 GMT -5
Hi all,
many of the 1st generation locomotives had cab side canvas to protect the crew from aggresive sunlight. I' d like to build some for my HO-diesels like my MKT GP7.
Did somebody scratch build any already? Any recommendations, photos or drawings are highly appreciated.
Thanks for looking Franz
|
|
|
Post by icghogger on Sept 16, 2010 8:58:10 GMT -5
In addition to Uncle Jay's suggestions, try cigarette papers, colored (stained) with watercolor or artist's markers, to simulate canvas sunshades, steam engine cab curtains or to cover radiators of switchers. Also, they rolls up real nice on the wire form, and you can tie them back with a few strands of fly tying thread. Just don't try to smoke 'em!
|
|
CIOR
Chairman
Posts: 2,046
|
Post by CIOR on Sept 17, 2010 11:20:41 GMT -5
Go to JoAnn Fabric, or send the wife after what you are looking for. Several years back I did a GP7 with the cloth sunshades. She found some ultra thin cloth, I then took tweezers and dipped it in tan paint and then squeezed the extra paint out and folded it how I wanted and let it dry.
It worked well. Then just used chalk powder to weather it up.
|
|
icrr3067
Engineer
The Main-Line of Mid America
Posts: 41
|
Post by icrr3067 on Jan 11, 2011 19:25:29 GMT -5
I use an A-line sun shade and cover it with masking tape, bend two wires to make the brackets, and paint it with Olive Drab by Model Masters: IMAG0067 by ICRR 3067, on Flickr
|
|
|
Post by pjd on Mar 30, 2011 9:41:57 GMT -5
The IC man suggested masking tape.
I use masking tape for canvas awnings, radiator curtains, and weather curtains on the back of steam locomotives as well. These were a common feature on early Alaska Railroad locomotives.
Create a staple shaped wire frame that extends into holes where the awning mounting brackets would go. Drape blue painters masking tape over the frame and seam it where ever the prototype was seamed by just overlaying the tape. When you have it shaped right, test it in position.
Now carefully remove the assembly from the model and infuse it with super thin ACC. The result is the adhesive in the masking tape is now bonded and will not blead out or dry out. You have in effect a reenforced plastic part with the texture and drape of canvas. For new canvas a little olive drab paint will do.
PJD
|
|
|
Post by big train james on Mar 30, 2011 23:40:56 GMT -5
|
|
|
Post by v200 on Aug 5, 2011 3:03:30 GMT -5
Folks, many thanks for your thoughts and recommendations
Greetings Franz
|
|