|
Post by sd45longhoodfoward on Aug 14, 2010 7:43:06 GMT -5
has anyone in here used the Train control system decoders like the AX6 i think is the model # iknow it has an out put for 1.5v bulbs do you have to solder on the middle of the board like you do with digitrax boards or are all the terminals at the ends of the board/I have been thinking about doing away with all my digitrax and buying all TCS it is a pain to solder on such a small terminal in the middle of the board on the digitrax ah123 if my memory serves me right is the # not to mention having to add the resistors!!what a pain LOL cant wait till it is all plug and play! sop give me any input you have on this thread Thanks!!!!!! ;D
|
|
CIOR
Chairman
Posts: 2,046
|
Post by CIOR on Aug 14, 2010 10:22:02 GMT -5
Many people on this board use them, I do as well. Digitrax decoders have far too many issues with them and I've had issues with them especially over the past 3 years. So much so that I went to TCS out of total frustration.
Since making the switch, I love the TCS decoders, I've used the A series and the T series on many engines. The T1 is a great decoder for a general installation. You can't go wrong with them!
|
|