DRGW 5398
Chairman
D&RGW SD40T-2 #5398
Posts: 386
|
Post by DRGW 5398 on Apr 27, 2010 23:20:30 GMT -5
Hey guys, I've been working on a couple ATH Genesis MP15AC's and have been trying to figure out if there is any other function outputs on the Quick Plug board besides the standard headlight (F0)? Can anyone explain where they are (if any)? Thanks!
|
|
|
Post by Raeder on Apr 29, 2010 23:21:23 GMT -5
Hi Andrew,
On some of those quick plug boards, I've found the Green and Violet wires will have a trace that leads to a hole bored in the circuit board that you can solder wires into if you want to use Function One and that sort of thing. Mainly I've seen this on the boards that have a nine pin connector hardwired to them. What you end up doing is looking from where that wire is soldered to the board and following the traces from there, if it dead ends some place, then you can hook something to it and use it as an additional output. This all assumes your decoder can handle the additional outputs, but most do.
Kevin
|
|