nssd70m2
Superintendent
Norfolk Southern Piedmont Division
Posts: 159
|
Post by nssd70m2 on Apr 12, 2009 12:23:35 GMT -5
So I have my ditch lights and headlight put into place on my athearn F7. I am using the DH123AT decoder. One lead of each ditch light is wired to each function output, and one of the headlight leads is wired to the white (forward) light. Now the other three lights all go to the blue (common), but I don't know what resistor I need. These are the bulbs that came out of an athearn genesis SD75M and they are 1.5V. What resistor would work best?
|
|
nssd70m2
Superintendent
Norfolk Southern Piedmont Division
Posts: 159
|
Post by nssd70m2 on Apr 12, 2009 12:24:04 GMT -5
"Other three wires"
|
|
nssd70m2
Superintendent
Norfolk Southern Piedmont Division
Posts: 159
|
Post by nssd70m2 on Apr 12, 2009 17:27:04 GMT -5
Okay. But for some reason my violet wire won't work...I know the decoder supports it and I programmed everything...
|
|
nssd70m2
Superintendent
Norfolk Southern Piedmont Division
Posts: 159
|
Post by nssd70m2 on Apr 14, 2009 18:26:24 GMT -5
Yeah can someone help? F1 (green wire) works fine but F2(violet wire) won't work. It is the DH123AT decoder....
|
|
nssd70m2
Superintendent
Norfolk Southern Piedmont Division
Posts: 159
|
Post by nssd70m2 on Apr 15, 2009 5:22:09 GMT -5
Yeah that's what I was thinking...well good news train show is 2 weeks away so I can get them there.
|
|