|
Post by johnnetzlof on Mar 27, 2009 21:44:42 GMT -5
I can give it a shot! Look sliek the stripes around 10 Inches tall, so, I can start working on a test set.
I'm a ta dbehind with printing, so it'll take a bit, but i can try it!
RailGraphics said no? Really?
**OH and I have decals for an Amtrak 4316 but I lost the email address of the guy i'm working on it for...I feel rather embarrassed.
|
|
|
Post by johnnetzlof on Mar 28, 2009 9:11:34 GMT -5
Well, I'm sure they have their reasons for it being difficult, but I'm willing to give it a shot. Do me a favor and send me a quick email note at JNDecals@yahoo.com just so I have a continued contact.
|
|
|
Post by johnnetzlof on Mar 30, 2009 23:07:46 GMT -5
Yes I did, scott, sorry things are a tad slow with us trying to move to a new house, but I'm cruising along, albiet slowly.
I have a test print I'm going to run off for sizing comparison on the logo, i can do this tomorrow.
|
|
|
Post by johnnetzlof on Mar 31, 2009 12:31:39 GMT -5
Is there a red outline around the numbers on the cab? Or am I beginning to imagine a red border??
|
|
|
Post by johnnetzlof on Mar 31, 2009 13:22:38 GMT -5
Thanks, i could see what appeared to be a red outline, but i couldn't tell if my eyes were strained from doing the images. About to run a test print.
|
|
|
Post by johnnetzlof on Apr 1, 2009 12:08:32 GMT -5
General Update:
The MK Sheet's first run is complete, the stripes, MK and m-k railroad equipment etc text printed out at a good size, I think i over sized the numbers and i know i oversized the MKCO logos. I got cocky and printed two, I intend to use one, I have a "foobie" sheet available. $2 takes it if anyone wants it.
Amtrak 4316 I Have your sheet printed, the blue looks a bit light, but it is over a white paper, on the black unit it should darken slightly. I didn't curve the front stripes, but i printed the sheet on super-fine paper, and I've been able to bend straightlines into a full circle with it. If you wind up having problems with it, le tme know and I'll try to match the curve for the manufacturer's e unit you wind up using, no charge. Email me so we can finish the process.
Jay- I printed out a white sheet for you. I gave you G Hourk in White and one se tin an "imitation gold dulux" type color. I can send it today! Again, email me.
**Note! I'm using a different decal paper than usual, its the same brand in the end, the only difference is the backing paper is white instead of light blue, the film is still clear. The only person I see this being an issue with would be Jay, as his sheet i smostly white. sorry man! If you need a key to where things are I can provide one. If you turn the sheet sideways to a lightsource you can sorta see where the ink is.
EDIT-Oh, and the Amtrak 4316 sheet seems to have become harder to see the white once the coating settled in... I'll provide a key for both of you.
***Note #2! I was running a couple of color tests as well, which lead to a few G&W style Ohio Central logos, up for grabs if anyone's actually interested
|
|
|
Post by johnnetzlof on Apr 1, 2009 12:48:15 GMT -5
Scott, drop me an email and we can go from there:
JNDecals@yahoo.com
|
|