bcrmlw
Superintendent
Posts: 186
|
Post by bcrmlw on Feb 23, 2010 15:46:32 GMT -5
Here's a rescue project I've been working on. Model is an Atlas C420 that was re worked and detailed by Mark Carlton. Mark replaced the stock rad section with a resin part, added the extra lights on the nse, as well as the all weather window on the engineer's side of the cab. Proper hoen and bell were added, along with a coat of primer. I purchased the model from mark via ebay, shaved off the molded door handles, and added a sinclair antenna. Right now I've got it painted and decalled, just waiting for a decoder.   -Trevor |
|
|
|
Post by Randy Earle on Feb 23, 2010 17:16:58 GMT -5
What's the comany that makes the resin parts? Looks good by the way.
|
|
bcrail
Superintendent
Posts: 162
|
Post by bcrail on Feb 23, 2010 21:29:53 GMT -5
Very nice!  |
|
bcrmlw
Superintendent
Posts: 186
|
Post by bcrmlw on Feb 23, 2010 23:02:14 GMT -5
Andy W scale models www.readytrain.com made the radiator section, the previous owner re used the Atlas radiator walkway. I'm not sure but I think the pilots are resin parts too. -Trevor |
|
|
|
Post by railfanalex on Feb 23, 2010 23:08:32 GMT -5
Cool project! Andy's stuff is good quality, he makes the RS3 sides for BC Rail and CP (with a few mods) with the correct MLW filters.
|
|
