Stan
Superintendent
Posts: 150
|
Post by Stan on Oct 11, 2009 20:08:38 GMT -5
Here is a GP40 that I have been working on. The pilot has two Richmond controls LEDS where the ditch lights will eventually go. The rightside one is Golden White and the left side is Sunny White. Although with my camera its hard to tell the difference. In person their is a stark difference. My preference is the sunny white since they are almost clear when off. I have DW 228s cored and ready but Im not pleased with their size so Im contemplating using the Railflyer ditch lights instead. And next time I have figured out how to drill an angled hole through the anticllimber through the pilot instead of down and back. Time for the putty on this one though. Duh. Has anyone used the Railflyer ditch lights?
|
|
DRGW 5398
Chairman
D&RGW SD40T-2 #5398
Posts: 386
|
Post by DRGW 5398 on Oct 11, 2009 22:15:51 GMT -5
I agree with you, the Sunny White is far better! I've never used RF ditch lights, but I'm sure they are N-I-C-E!
|
|
|
Post by superfleet93 on Oct 12, 2009 9:10:02 GMT -5
You can't go wrong with Railflyer ditch lights and yes, I have used them. There is plenty of room for the LED and wire both.
Perry
|
|