|
Post by atsf2929 on Sept 4, 2009 13:34:14 GMT -5
I have an HO Atlas GP40 undec body of the Made In Austria kind. Does anyone know frame what I can mount this on? I'm not particular if it's powered or not but ATSF had a single exTPW GP40 that I would like to model.
How about fabricating a frame?
Let's hear it.
- Dave
|
|
|
Post by southern3200 on Sept 4, 2009 13:53:48 GMT -5
Dave, I know somebody with an Atlas/Roco drive for sale. If interested send me a PM.
|
|
|
Post by wpdivwldr on Sept 4, 2009 14:40:17 GMT -5
If you have no luck finding a drive let me know, actually they run very nice John
|
|
|
Post by poweredby251 on Sept 4, 2009 23:03:57 GMT -5
The Atlas/Roco units were latter produced for ConCor with slightly updated drives (new motor, added light circuitboard, single flywheel) but the same frame mounts and shells. The frames from the GP-38's will work as well. Sadly the fuel tanks are still very sub-par in shape and size, and the same major detail defects (lack of cab steps and cab doors) are still present on the ConCor. A Cannon Cab and sub-base will sort that out though.
|
|
|
Post by atsf2929 on Sept 7, 2009 15:23:37 GMT -5
Yeah, I was kinda hoping to avoid the work that comes with making the Atlas fuel tanks look better but...
Thanks for everyone's replies
Dave
|
|
|
Post by poweredby251 on Sept 7, 2009 18:43:31 GMT -5
You could probably rig it to work with an Athears GP-38-2 or 40-2 frame. Just be sure to use the older style sideframes.
John
|
|