|
Post by mandealco on May 31, 2022 15:18:28 GMT -5
Hi Although this photo shows an N-Scale model, this may help you. The sealed beam headlight in this FP-9 was cut from an Alco RS-3 shell and inserted in the headlight opening. Worked for me. Alternatively, Scott Lupia at KV models makes a flat plate that is inserted in the hole in much the same way. Mine isn't illuminated, but can be by using the existing lighting. Hope this helps. Cheers Steve
|
|
|
Post by icghogger on Jun 4, 2022 8:05:56 GMT -5
Like the subject says, I'm trying to find a dual beam headlight for the Highliner shell, upper position. Simply that
Lyle D
Lyle, I have a spare set and will mail it to you next week.
|
|