icrr3067
Engineer
The Main-Line of Mid America
Posts: 41
|
Post by icrr3067 on Feb 24, 2013 22:47:29 GMT -5
Athearn released about a month ago the IC GP's. They were done really well, but they were missing some details. Out of the box they were about 75% correct. Here are two pictures of IC 9323 out of the box. The side shot:
ICGP_2 by Timothy N. Alund, on Flickr And the nose shot:
ICGP_3 by Timothy N. Alund, on Flickr The details missing from the GP are poling pockets, a drainage tube on the enginer side, "Always Be Careful" decals on the front and rear pilot, the horn is the the correct style, the mu cables should be a set of three, and it's missing a tool box on the enginer side sill. Here is IC 9185 after my work to the GP. It is about 95% correct, the only two things I didn't do were installing the tool box on the sill, b/c I didn't want to destroy the sill if I messed up, and the other thing is I didn't replace the horn yet b/c no one makes the correct style of the horn, I did try making one out of plastic but I didn't like how it looked. Here is the side shot:
ICGP_4 by Timothy N. Alund, on Flickr Here is the close up of the drainage tube:
ICGP_5 by Timothy N. Alund, on Flickr And the nose shot with the "Always Be Careful" decals, the added poling pockets, and the correct mu hoses: ICGP_6 by Timothy N. Alund, on Flickr
|
|
|
Post by Matthew on Feb 25, 2013 0:57:21 GMT -5
Should there not also be a GP9 sign on each side at the front? Matthew
|
|
|
Post by icghogger on Feb 26, 2013 12:13:44 GMT -5
Nice Work, Timothy, Very Nice!!
|
|
|
Post by mta224 on Mar 21, 2013 8:37:49 GMT -5
Nice work,Tim.Those added details are what makes the difference.What did you use for the poling pockets?
Anthony
|
|
icrr3067
Engineer
The Main-Line of Mid America
Posts: 41
|
Post by icrr3067 on Jul 8, 2013 18:19:04 GMT -5
Should there not also be a GP9 sign on each side at the front? Matthew My apologies for not being on here for a while. Matthew only a couple of orders got the GP9 plate on the side of the engine. The one's that Athearn did were not in thoes orders.
|
|
icrr3067
Engineer
The Main-Line of Mid America
Posts: 41
|
Post by icrr3067 on Jul 8, 2013 18:20:54 GMT -5
Nice work,Tim.Those added details are what makes the difference.What did you use for the poling pockets? Anthony Again, my apologies for not being on here, Anthony, I used Grant Line Eye Bolts, the pack is a ton of different sizes and you just match up the one that fits the frame and cut off the "bolt".
|
|