|
|
Post by conrailnut2484 on Feb 2, 2013 23:42:52 GMT -5
Hopefully someone can help me with this I am trying to figure out what voltage they are cause im getting ready to start decodering the 5 I got and im hoping to be able to do a direct wire to the dh165ip. Are they 1.5 volt, 3 volt, or are they 12 volt leds
|
|
|
|
Post by Mark R. on Feb 3, 2013 0:26:28 GMT -5
Most Atlas engines that I've come across, already have a resistor soldered to the LED itself. You can easily tell by looking at one leg of the LED, there will be a small resistor on the end of one lead IN the shrink tubing.
If the resistor is there, you should be able to connect it straight to the 12 volt output source of your decoder.
Mark.
|
|
|
|
Post by conrailnut2484 on Feb 3, 2013 13:21:54 GMT -5
thanks mark ill have to look this afternoon once i hit the train room
|
|
