|
Post by stevef45 on Sept 29, 2014 4:34:29 GMT -5
Robert, yes I did thank you again!!
And as i said before, my package from China arrived the same day a package from georgia arrived. Now all the real fun can begin, hahahahhahahaha. You know i always get psyched out looking at pics like in this thread. Im like "oh the piping and strips he cut aren't that small." Well i opened the package and immediately said to myself, "fudgeeeeeeeeee, these are really tiny pipes!" fudge wasn't the word that was actually used lol
|
|
|
Post by stevef45 on Sept 29, 2014 4:36:56 GMT -5
Steve, I cut them 1/16" wide. How wide is that strip that you start out with? 2 inch by 6 inch?
|
|
|
Post by icghogger on Sept 29, 2014 7:36:40 GMT -5
The sheet stock was just a piece I had in my stash. 2"X6" would be a good size to work with. Use dividers to mark the sheet, and cut away!!
|
|
|
Post by stevef45 on Dec 2, 2014 5:26:40 GMT -5
ughh, i think im going to have try mine over again. I had used a piece of brass wire and the glue would not dry with the styrene sheet piece. I ended up using krazy glue and to much styrene. Looks all fugly now.
|
|
|
Post by shellfish on Jan 31, 2016 13:03:00 GMT -5
Very impressive work! Thanks for the tutorial.
|
|
|
Post by icghogger on Oct 10, 2017 12:53:00 GMT -5
I have completed adding the photos back to this post. Thanks for your patience!
|
|
|
Post by areibel on Oct 11, 2017 14:37:26 GMT -5
Thank you for getting it back together! These threads are great!
|
|