|
Post by peahrens on Jun 8, 2020 12:54:54 GMT -5
I'm new so hope I'm posting in the correct place.
The fuel tank, a plastic rectangle that covers the frame motor mount, just disappeared. Unlikely to be uncovered. The frame rectangle measures about 29mm W x 40mm L. The motor mount depth is about 12mm to the sill. I was hoping someone might have a part from a donor loco.
Alternatively, perhaps another part would fit, or be modified to do so (e.g., if too long).
Being new, I presume I simply have to check back for replies on this post, and will not get an e-mail notification? If you can clarify, I appreciate the help.
Paul Ahrens New Braunfels TX
|
|
|
Post by countryroads on Jun 8, 2020 20:55:02 GMT -5
Don't have an SD7/9 so can't help but you can check evilbay aka eBay.
And also look under proto SD7 or 9 as they share the same frames.
Welcome to the Double D.
Yes checking in might be your best bet unless someone has one they can spare.
Then they'll most likely send you a PM (personal Message) here at the site.
Hope you find what your after.
|
|