Post by trucklover on Apr 14, 2009 14:54:00 GMT -5
Been a little over a week since i worked on the module, i worked on it for about an hour last Wednesday when my girlfriend was over at my house, she was helping too, it was fun LOL. She had spring break last week, so pretty much for the past 9 days, i have spent all my time with her ;D Well she went back to skool yesterday, and i spent all day yesterday and a few hours this morning working on the module. Ive gotten a few things done, and im really happy with how this Assembly Plant is turning out.
First, i layed out some more Smooth-It for the Assembly Plant truck docks and "yard" around the building. I also paved the area where the 2 Auto Loading Ramps will be. Painted all the areas i poured, and i also weathered the rails that the Loading Ramps roll on. Loading Ramps for the Shipping and Receiving docks for the Assembly Plant were painted with "Concrete" Color, and the rest painted with a custom mix of Gray i mixed using the WS Asphalt Top Coat and some White craft Paint.
Retaining Walls for around the Loading Docks were painted and a yellow stripe was added atop all 4 of them. I also installed a section of Retaining Wall next to the Auto Loading Ramps to separate rail traffic from truck traffic and keep loading separate from normal truck traffic around the plant. Ive installed yellow Bumping Posts around all 3 large cargo doors on the front of the plant. Cadged Laddes were painted and installed in a few locations (2 of them from ground level to roof level, and 2 from roof level to the tops of the rectangular structures on the roof. I also added ladders on the "office" part of the roof)
Various Piping was added on the roof, and a rather large horizontal storage tank was set in place on the ground next to the plant and just in front of the large Receiving Cargo Door. The top rear of the Tank has a pipe coming out and leads to the roof where it goes into the building just past the cooling buildings ductwork, which is also located on the roof. 3 Pipes next to the large storage tank lead from ground level from an underground storage tank up to the roof and are distributed to various locations in the plant via wholes in the roof. One pipe goes to the front rectangular structure with the stacks. Another goes to the rear rectangular structure with the stacks. And the third drops down in the roof just past the last support on the roof for the piping.
Ive also added a large and small vertical storage tanks to the roof in front of the rear rectangular structure with the stacks. The pipe from the storage tanks drops into the roof. A small pipe was installed from the front rectangular structure to the rear rectangular structure with the stacks. Air Conditioner Units were added to the roofs of the "Office" portion of the Assembly Plant.
I also decided to change the color of the ducting for the Cooling Building. Ducting, pipes, tanks, and supports were all painted the same color to match.
One last thing, the roofs will all be covered in a layer of gravel when im finished detailing the roofs and such, so the paint you see on the roofs will not be visible when im done ;D
Here are a few pictures i snapped off a few minutes ago of the recent progress i have made:
An Overall shot of the Assembly Plant
Shipping Truck Docks and the large Shipping Cargo Door
Receiving Truck Docks, Large Receiving Cargo Door, and the large horizontal storage tank with bumping posts
Cooling Building and Ductwork, Large Cargo Door, Piping, and some Auto-Racks waiting to be loaded with some new cars out of the plant
The right side of the plant, near the "office" of the plant. This is the entrance to the loading docks and such where a guard shack is located with chain-link fences and gates. In the upper right of this picture is the entrance to the "employee/customer" parking for the plant which also has a guard shack and chain-link fencing with gates.
Auto-Loading Racks on rails. 2 of the 3 tracks will be used as loading tracks for autoracks, the third, closest to the wall, will be used as a unloading track for flats and such, as it wont be a long enough siding for auto-racks.
The rooftop piping
Roof-Top Storage Tanks
"Office" Air Conditioner Units
And a few random pics:
Sorry for the "fuzzy" pictures, this is right in front of my window, and its hard to take pictures during the day, but i wanted to snap some off and post them before i do any more work lol. Even with the blinds closed, the light is still bright and shines through, making the pictures kinda fuzzy....
lol
First, i layed out some more Smooth-It for the Assembly Plant truck docks and "yard" around the building. I also paved the area where the 2 Auto Loading Ramps will be. Painted all the areas i poured, and i also weathered the rails that the Loading Ramps roll on. Loading Ramps for the Shipping and Receiving docks for the Assembly Plant were painted with "Concrete" Color, and the rest painted with a custom mix of Gray i mixed using the WS Asphalt Top Coat and some White craft Paint.
Retaining Walls for around the Loading Docks were painted and a yellow stripe was added atop all 4 of them. I also installed a section of Retaining Wall next to the Auto Loading Ramps to separate rail traffic from truck traffic and keep loading separate from normal truck traffic around the plant. Ive installed yellow Bumping Posts around all 3 large cargo doors on the front of the plant. Cadged Laddes were painted and installed in a few locations (2 of them from ground level to roof level, and 2 from roof level to the tops of the rectangular structures on the roof. I also added ladders on the "office" part of the roof)
Various Piping was added on the roof, and a rather large horizontal storage tank was set in place on the ground next to the plant and just in front of the large Receiving Cargo Door. The top rear of the Tank has a pipe coming out and leads to the roof where it goes into the building just past the cooling buildings ductwork, which is also located on the roof. 3 Pipes next to the large storage tank lead from ground level from an underground storage tank up to the roof and are distributed to various locations in the plant via wholes in the roof. One pipe goes to the front rectangular structure with the stacks. Another goes to the rear rectangular structure with the stacks. And the third drops down in the roof just past the last support on the roof for the piping.
Ive also added a large and small vertical storage tanks to the roof in front of the rear rectangular structure with the stacks. The pipe from the storage tanks drops into the roof. A small pipe was installed from the front rectangular structure to the rear rectangular structure with the stacks. Air Conditioner Units were added to the roofs of the "Office" portion of the Assembly Plant.
I also decided to change the color of the ducting for the Cooling Building. Ducting, pipes, tanks, and supports were all painted the same color to match.
One last thing, the roofs will all be covered in a layer of gravel when im finished detailing the roofs and such, so the paint you see on the roofs will not be visible when im done ;D
Here are a few pictures i snapped off a few minutes ago of the recent progress i have made:
An Overall shot of the Assembly Plant
Shipping Truck Docks and the large Shipping Cargo Door
Receiving Truck Docks, Large Receiving Cargo Door, and the large horizontal storage tank with bumping posts
Cooling Building and Ductwork, Large Cargo Door, Piping, and some Auto-Racks waiting to be loaded with some new cars out of the plant
The right side of the plant, near the "office" of the plant. This is the entrance to the loading docks and such where a guard shack is located with chain-link fences and gates. In the upper right of this picture is the entrance to the "employee/customer" parking for the plant which also has a guard shack and chain-link fencing with gates.
Auto-Loading Racks on rails. 2 of the 3 tracks will be used as loading tracks for autoracks, the third, closest to the wall, will be used as a unloading track for flats and such, as it wont be a long enough siding for auto-racks.
The rooftop piping
Roof-Top Storage Tanks
"Office" Air Conditioner Units
And a few random pics:
Sorry for the "fuzzy" pictures, this is right in front of my window, and its hard to take pictures during the day, but i wanted to snap some off and post them before i do any more work lol. Even with the blinds closed, the light is still bright and shines through, making the pictures kinda fuzzy....
lol
I can see it now...3 or 4 MRL SD45s or SD45-2's pulling a string of autoracks of new Fords for delivery; and now back to reality. Glenn
