|
Post by montyvox on Feb 16, 2017 10:51:16 GMT -5
Good morning-
I have an Athearn SD60 that I remotored and put in a Loksound Series Direct board, with sound, in the unit.
I've been trying to find a way online to stop the ditchlights from flashing.
Does anyone know what CV's are needed to be updated to fix this?
Thanks Matt
|
|
|
Post by gnsteve on Feb 17, 2017 0:22:55 GMT -5
I wanted constant ditch lights on my GP35s equiped with Train Control Systems decoders. CV36 (Violet wire) changed to a value of 4 should map it to F1 so both ditch lights are on or off at the same time and the horn @ F2 should not affect the lights. If this doesn't fix your problem, I'll review my notes. (I also adjusted some CVs so the headlights and ditch lights were closer in brightness)
|
|
|
Post by james13 on Apr 17, 2017 3:37:56 GMT -5
Have you worked out the issue? I recommend asking if someone you know has an ESU Lokprogrammer that you could put the loco on amd program. If not what functions are the ditchlights on? I can run it through my lokprogrammer and see what CV's need to be changed for you. I can't guarantee that the CV's will be right but it could help.
|
|