|
Post by Randy Earle on Feb 17, 2015 15:07:57 GMT -5
I'm looking on making the next board logo an Alco. With so many of us having ATLAS C424s and 425s there's gotta be some great pix in the mix. I have half a dozen myself. Bowser makes all kinds of the critters, so let's see some photos....maybe your unit with be the next logo?
|
|
|
Post by iomalley on Feb 17, 2015 17:36:53 GMT -5
|
|
dti406
Superintendent
Posts: 161
|
Post by dti406 on Feb 18, 2015 11:42:51 GMT -5
Here are a few and RS-32's are pre Centuries also. Atlas RS-32 with added detail. Stewart C628 & C630 on a 36 Car Ore Drag. New C-430's on a Flexiflow. Rick J
|
|
|
Post by iomalley on Feb 18, 2015 16:22:42 GMT -5
Luv the backdrops Rick!
|
|
|
Post by nsc39d8 on Sept 25, 2015 13:56:16 GMT -5
|
|
dtinut
Chairman
Modeling the DT&I of the 60's & 70's
Posts: 661
|
Post by dtinut on Sept 27, 2015 9:10:41 GMT -5
Here is a PC C-425 I did a couple years ago... I have weathered this since then, but currently don't have any pics to share - I will take some when I get back home. (I am currently in Kentucky) Brian
|
|
|
Post by nsc39d8 on Sept 27, 2015 14:48:30 GMT -5
Brian,
I like the looks of that coupler pocket you made. What parts did you use? I need some to highlight a couple of Stewart C630's.
|
|
dtinut
Chairman
Modeling the DT&I of the 60's & 70's
Posts: 661
|
Post by dtinut on Sept 28, 2015 15:54:19 GMT -5
The coupler boxes are all scratch. I started with a KD box, and built it up from there. It uses a slightly longer coupler than the std no5. I also started with old atlas model that didn't have the coupler mounts and I machined some from aluminium.
Lots of tiny bits of styrene glued together... Thx Brian
|
|