|
|
Post by Randy Earle on Apr 13, 2012 13:24:29 GMT -5
Hi Tech makes some great SD-39 hood sides that when combined with Cannon & Co parts makes a great looking unit. You can use any SD-40 or SD-38 as a starter.  |
|
|
|
Post by dmfoamer on Apr 15, 2012 9:47:06 GMT -5
Hi Tech?  their site doesn't show locomotive sides |
|
|
|
Post by Randy Earle on Apr 15, 2012 9:51:01 GMT -5
|
|
|
|
Post by dmfoamer on Apr 15, 2012 23:42:38 GMT -5
cool wouldn't have thought to look there
|
|
|
|
Post by drolsen on Apr 16, 2012 14:22:25 GMT -5
Just FYI, the Hi-Tech sides can also be used to model a GP39. I plan to eventually use them to kitbash a CSX GP39 from an Atlas GP38. I've always wanted to build one of those unique CSX units that aren't available in model form but are a relatively easy kitbash with these hood sides.
Dave
|
|
deez
Chairman
Midland Belt Railway
Posts: 949
|
Post by deez on May 6, 2012 2:14:09 GMT -5
C&O's GP39's were just as cool as the SD's. Make sure you save the clean air room sections of the SD39 sides.They can be used for an SD40A kitbash. You just use a Cannon SD40 inertial filter screen instead of the smaller GP/SD35/39 style screen.
|
|
|
|
Post by railtrax on Apr 24, 2014 1:53:04 GMT -5
Hi all. Also look up highball graphics site for more info on buying these High Tech kits
mgdecals.com
There is a photo of the SD39 hood sides kit on their site.
I might have to buy 1 for an upcoming SP SD39 project soon.
Thanks.
Pete
|
|
|
|
Post by cartelcaipira on Sept 20, 2014 17:56:03 GMT -5
|
|
their site doesn't show locomotive sides
