|
|
Post by oldrail on Nov 13, 2015 5:03:08 GMT -5
Since this is Friday the 13th, it seems to be the appropriate day to ask the question:
Is there a product or other means to remove those occasional mystery miniscule deposits of ACC that show up where they don't belong without destroying paint and/or plastic?
Dick Haave
|
|
efram
Chairman
Posts: 206
|
Post by efram on Nov 13, 2015 9:56:07 GMT -5
Yes, I bought some ACC "un-cure" by Bob Smith Industries. It seems to work well without damaging painted/plastic surfaces. You must let it sit for about 30 seconds.
|
|
pacbelt
Chairman
Building Layout #11!! ;)
Posts: 682 
|
Post by pacbelt on Nov 13, 2015 12:42:49 GMT -5
Yes, I bought some ACC "un-cure" by Bob Smith Industries. It seems to work well without damaging painted/plastic surfaces. You must let it sit for about 30 seconds. COOL! I got to get me some of THAT!! ~ Carmine |
|
|
|
Post by slowfreight on Nov 19, 2015 9:56:47 GMT -5
I also recall using Z7 Debonder, which IIRC was made by the Zap CA folks.
Never had the debonder damage plastic, but it can discolor paint if you're not careful.
|
|
|
|
Post by tjmfishing on Nov 20, 2015 18:38:15 GMT -5
Depending on the surface, acetone works really well and is dirt cheap. I'm not 100% sure what the CA bottles are made of but I think they're nylon, which CA won't attack. Neither will acetone. Whenever my bottles clog or get a buildup on the end I soak the tips in acetone for five minutes. This obviously won't work on styrene, but works well on wood, metal or other plastics.
|
|
