zakc
Chairman
Friends don't let Friends run steam
Posts: 229
|
Post by zakc on Apr 19, 2013 22:17:37 GMT -5
Does anybody know what size radiator fans I can use to replace the molded solid fans on my Kato unit
Thanks in Advance
CZ
|
|
|
Post by stevef45 on Apr 20, 2013 12:55:18 GMT -5
i believe 52" fans are used on sd60's and up. detail associates makes a 3 fan kit for the 52" fan.
|
|
sgoti
Chairman
Posts: 459
|
Post by sgoti on Apr 21, 2013 0:38:51 GMT -5
i believe 52" fans are used on sd60's and up. detail associates makes a 3 fan kit for the 52" fan. No, the SD60, 70, 70M, and 70 MAC all had 48-inch fans. The SD70ACe/M-2 had the larger fans.
|
|
|
Post by binder001 on May 20, 2014 9:51:48 GMT -5
By the way, depending on how demanding you are, I have had good luck painting the fans so that they look like "see thru" fans. I use a thin wash of black India ink (I thin it with Model Master Acryl thinner) to put in the depth. I take a small brush and some medium to light gray paint and carefully paint the cast in fan blades - while the paint is still wet I wipe off the fan grills with a rag DAMPENED lightly with alcohol. This usually leaves the fans looking pretty good, but I also try to match the roof color and lightly dry brush the fan grills to bring them back. So far I have been pretty happy using this on older shells that have the fans molded on.
|
|
|
Post by railfansd40t2 on Aug 28, 2014 17:07:34 GMT -5
I would like to see some pics of the finished fans using this technique please.
Paulie
|
|